Items you will need from Michaels:
1) Bead Landing 20 Gauge wire ( Pick color you want) Item Number #10105407 $3.79
2) Bead Landing for round nose pliers(#10443464 $5.79) and Bead Landing Mini Side Cutter ( #10443466 $5.79
3) Premo! Sculpey Accents Oven Bake Clay -Opal- 2oz #10476942 $2.89 for the base and what ever color you want for that accent decoration for the base. I used the Premium Push Mold by Craft Smart.
6) Sculpey Clay Softener #10139403 $6.29
5) Remembrall I got mine from Amazon Universal Studios Parks Wizarding World Harry Potter $32.95
Steps:
1) Take the Bead Landing 20 gauge wire make circle base loss get for when you add the Premo clay over the wire. Leave enough wire so you can wrap it around itself but cut off the extra wire you don't need for the base. Once you have determan the size cut the wire and wrap the extra wire. As you wrap the wire around pitch in so no kink in the wire. I wrapped mine two times to make it sturdy.
2) I made three legs
determan the hight before you cut the wire make sure you leave enough to wrap around the base then down foot then back up and wrap around base again then repeat per leg you decide to make. ( the below shows how to better than my explanation)
use the round nose pliers to help you wrap and push the wire down when there is not a lot left. then shape the leg. than repeat per leg
3) Prep the premolar sculpt if it is to hard use the Softener (little goes long ways and if its a color clay wear gloves. Apply clay to the legs first then the base. don't make it to think just enough to over the wire.
4) grab another color and the mold for the decoration. makes as many as you want of if you chose you can not do this step up to you.
5) set oven at 275 for 30min
6) after clay cold i used super glue to glue the decorations on the stand
my Youtube video:
